Lee Precision Pacesetter 4-Die Set .450 Bushmaster

The Lee Precision .450 Bushmaster Pacesetter 4-Die Set is perfect for the beginning or experienced reloader. The set is made of steel and includes a Full Length Sizing Die which produces ammunition to factory-new specifications, using cases fired in other guns. The Powder Through Expanding Die charges the case while expanding the case mouth. The Bullet Seating & Feed Die works with almost any point style bullet and a simple finger adjustment is all that is needed to adjust the seating depth. The Factory Crimp Die will crimp the bullet in place more firmly than any other tool.

 INCLUDES:

• Full Length Sizing Die, (Needs lubrication)
• Powder Through Expanding Die 
• Universal Shell Holder
• Factory Crimp Die
• Bullet Seating Die
• Powder Dipper
• Instructions
• Storage Box

FEATURES:

• Made of Steel
• Produces ammunition fired in other guns, to factory-new specifications with the Full Length Sizer
• Crimps bullet firmly in place with the Factory Crimp Die

NOTES:

• For further Load Data try HODGDON Powder Co.

PHOTO NOTE:

Load Data and Dipper are for illustration purposes and NOT included with this set.

     IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

• DO NOT USE more powder than recommended
• DO NOT USE a heavier bullet than recommended
• DO NOT SEAT the bullet deeper than normal
• DO NOT USE magnum primers unless using a slow burning ball powder
• Greatly oversize bullets, excessively hard bullets ro cases that are too long will cause higher pressures
• High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

• Always wear safety glasses when reloading and shooting.
• Ammunition loaded with these tools should be used in modern guns, in good condition.
• Children should not be permitted to reload ammunition without strict parental supervision.
• Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
• We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.

Parts

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.

Prop 65: Warning: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

Prop 65: Warning: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.